The Zamac Nailin is a nail drive anchor which has a body formed from
Zamac alloy. Drive nails are available in carbon or stainless steel. The
anchor can be used in concrete, block, brick or stone.A corrosion
resistant Zamac alloy is used to form the anchor body with either a
mushroom or flathead. The anchor can be used for light duty, tamperproof
applications. The anchor is not recommend for overhead, life-safety or
sustained tensile loading applications
Installation:
- Drill
a hole in base material using a carbide drill bit the same diameter
as the nominal diameter of the anchor to be installed.
- Drill the hole to specified embedment depth, plus 1/4in. for pin extension, and blow hole clean using compressed air.
- Position fixture and insert Hammer Drive anchor.
- Tap with hammer until flush with fixture, then drive pin until flush with top of head.
Also available Zinc Plated Steel Nail